EN6
1.
The current time zone value starts flashing.
2.
Use the
+
key to set the time zone. The range runs from 0 to -12 and then runs from 12
back to 0 in consecutive 1-hour interval.
3.
Press and release the
SET
key to enter the
“Language Setting”
.
LANGUAGE SETTING
The weekdays can be displayed in LCD1 with the pre-set languages: German = d, English = US,
French = F, and Spanish = E.
1.
Set the desired language for the weekday display in LCD1 by use of the
+
key.
2.
Press and release the
SET
key to enter the mode
“Manual Time Setting”
.
MANUAL TIME SETTING
In case the Moonphase wall clock is not able to detect the DCF-signal (disturbances, transmitting
distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
1.
The hour digits will start flashing on LCD1.
2.
Set the desired hours by pressing and releasing the
+
key followed by pressing the
SET
key.
3.
Now the minute digits will start flashing.
4.
Set the desired minutes by pressing and releasing the
+
key . If the
+
key is held, the units
will increase by 5.
5.
Press and release the
SET
key to move to the
“Year Setting”
.
YEAR SETTING
The year can be selected sequentially from 2001 to 2029 and will then start over again (default
setting 2006). Only the last 2 digits of the year will be visible on LCD2 .
1.
The year digits will start flashing on LCD2. Select the desired year by use of the
+
key.
2.
Press and release the
SET
key to switch to the
“Month Setting”
.
MONTH SETTING
1.
The month digits on LCD2 will start flashing (Default setting 1). Set the desired month by
use of the
+
key.
2.
Press and release the
SET
key to move to the mode
“Date Setting”
.
DAY SETTING
1.
The digits for the day will start flashing on LCD2 (Default setting 1). Set the desired day by
use of the
+
key.
