42
To set the clock:
1.
The hour and minute digits start flashing in the time display section.
2.
Use the IN key to adjust the hours and the OUT key to adjust the minutes. If you hold the key while you
adjust, the hours move 1 hour and the minutes move 5 minutes.
3.
Confirm with the SET key and enter the
“Calendar Setting”
or exit the setting mode by pressing the CH or
SNZ key
Note:
The unit will still try to receive the signal at each full hour despite it being manually set. When it does receive the
signal, it will change the manually set time into the received time. During reception attempts the DCF tower icon will
flash. If reception has been unsuccessful, then the DCF tower icon will not appear but reception will still be
attempted the following hour.
CALENDAR SETTING
Year (flashing)
Date (flashing) Month (flashing)
The date default of the Weather station is 1. 1. of the year 2003 after initial set-up. Once the radio-controlled time
signals are received, the date is automatically updated. However, if the signals are not received, the date can also
be set manually. To do this:
1.
Using the IN key, set the year required. The range runs from 2003 to 2039 (default is 2003).
2.
Press the SET key to enter the month and date setting mode.
3.
Press the IN (or OUT) key to set the date and the OUT (or IN) key to set the month required.
4.
Confirm with the SET key and enter the “
Snooze setting ”
or exit the setting mode by pressing the CH or
SNZ key.
