48
3.
Within 30 seconds of powering up the first transmitter, insert the batteries to
the Temperature station. Once the batteries are in place, all segments of the
LCD will light up briefly. Following time as 0:00 and the indoor temperature
will be displayed. If they are not shown in LCD after 60 seconds, remove the
batteries and wait for at least 60 seconds before reinserting them.
4.
The outdoor temperature from the first transmitter (channel 1) should then
be displayed on the Temperature station. Also, the signal reception icon will
be displayed. If this does not happen after 2 minutes, the batteries will need
to be removed from both units and reset from step 1.
5.
Insert the batteries to the second transmitter as soon as the outdoor
temperature readings from the first transmitter are displayed on the
Temperature station.
