Technogym Step 500i, Руководство по техническому обслуживанию

Страница: 55 / 182

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 5.1
5. INSTALLATION INSTRUCTIONS
5.1. SPECIFICATIONS AND REQUIREMENTS
For correct machine installation, make sure that:
1.
The machine is installed on a level surface that is free of vibrations and has sufficient carrying
capacity for the combined weight of the machine and user.
2. The place of installation is free of dust and sand.
3. The place of installation meets the operating temperature and humidity conditions specified in
paragraph
2.6. “Ambient specifications”.
4. The machine is not positioned close to sources of heat, sources of electromagnetic noise
(television sets, electrical motors, antennas, high voltage lines, household appliances, etc...) or
medical equipment.
5. To eliminate possible interference with the cardio receiver, no transmitters should be placed less
than 1 meter from the display.
Only for 500i, 700i and 700i E models.
6.
The mains voltage must match the value specified on the machine rating plate.
7. The electrical system must be correctly earthed.
8. The wall outlet used should be reserved for the machine and have a rating of at least 100 VA.
9. The maximum number of machines connected in cascade should be that indicated in paragraph
3.1.11. “Power entry module”.
10. Position the mains lead of the machine where it will not be underfoot.
5.2. INSTALLATION REQUIREMENTS AND SPECIFICATIONS
FOR WELLNESS TV MACHINES
1. Ensure that the specifications and requirements for installation have been met (see paragraph
5.1. “Specifications and requirements”).
2. To obtain a good video signal, the S/N ratio at the antenna signal input of a Wellness TV
machine should be between 70 and 80 dB.
WARNING: If the machine is not connected to a terrestrial antenna--or if it is but the
antenna line is split by devices such as TV distribution units, modulators, etc.--the machine
will not be able to receive a usable antenna signal for radio channel tuning.