17
Chest Incline
A
B
Replacing the cable
Cables must always be replaced at the first sign of wear, even if only the outer
rubber protection is worn.
WARNINGS
Carefully check the state of the cables once a month.
ALWAYS use cables supplied directly by Technogym.
To replace the cable, proceed as follows:
- remove the protective panel covering the weight stack, following the
instructions found in the paragraph headed
Removing the front weight stack
panel
;
- unscrew the screws (
A
) of both tension clamps (
B
) and remove the cable; as
soon as they are released from the cables, the two levers will rise slightly;
- insert the new cable and retighten screws (
A
) on one tension clamp only (follow
the original path of the cable as shown in the drawing);
