Technogym EXCITE Run 500, Руководство по техническому обслуживанию

Страница: 123 / 234

RUN EXCITE-2008: Service & Maintenance Manual - rev. 1.3
Page 7.15
7.10. HAND SENSORS DISASSEMBLY
Only for 700 / 700E and 900 / 900E models.
Figure7.10-1
1. Turn off the machine and unplug the mains
lead from the wall outlet.
For each sensor:
2.
Back off the 2 screws
(a)
with a small
Phillips screwdriver.
Figure7.10-2
3. Lift up the upper sensor and extract the lower
one. Disconnect the fastons
(b)
and
(c)
.
4.
Remove the two sensors.
During the reassembling of the hand
sensor plates, use the plastic guide pins
(d), to prevent squeezing the cables.
To reassemble the hand sensors, carry out the
above steps in reverse order.