MYWELLNESS KIOSK PRE-INSTALLATION REQUIREMENTS
Copyright® Technogym
– all rights reserved – reproduction prohibited
Date: 11-01-2021
Document Code: PIR-00166-EN
Rev: 1.1
Uncontrolled copy if printed
- 10 -
5. NETWORK REQUIREMENTS
5.1 INTRODUCTION
MYWELLNESS KIOSK supports both wireless and wired internet connection.
In all cases, the network must be installed and configured by the customer before Technogym delivers
the product, in accordance with the technical specifications set out below.
5.2 ETHERNET CABLED NETWORK
▪ Category 5e/6 – UTP Ethernet cables with RJ45 patch;
▪ Switch with a number of ports greater than the number of connected equipment.
5.3 WIRELESS NETWORK
Connect the product to the Wi-Fi network, taking into account the following requirements:
▪ Key Standards Compliance: IEEE 802.11 a/b/g/n/ac;
▪ Additional Standards:
IEEE 802.11d/e/h/i/k
– IEEE 802.11r/w
▪ Frequency: 2.4GHz or 5GHz;
▪ Security Protocol List:
Supported protocols: WEP, WPA/WPA2 PSK, 802.1x EAP, none;
EAP: PEAP/TLS/TTLS/PWD
Phase 2 Authentication: PAP/MSCHAP/MSCHAPV2/GTC
The Protocols WPA/WPA2 Enterprise are supported.
Security:
– WEP
– WPA Personal
– WPA2 Personal
– WMM
– WMM-PS (U-APSD)
– WMM-SA
– AES (hardware accelerator)
– TKIP (hardware accelerator)
– CKIP (software support)
• Proprietary protocols:
– CCXv2
– CCXv3
– CCXv4
