Climb Excite
22
Routine maintenance
The product should always be kept clean and free of dust, in compliance with common health and hygiene standards.
To clean the display , proceed as follows.
- Turn off the product by pressing the main switch to the “0” position.
- Take the product’s power plug out of the wall socket.
- Clean the display using a damp (not wet) cloth.
Clean the entire product once a week.
- Turn off the product by pressing the main switch to the “0” position.
- Take the product’s power plug out of the wall socket.
- Clean outer parts with a damp sponge.
Do not use chemical products or solvents.
Do not rub too hard on the control panel and diagrams, or on the written instructions on the stickers.
Lubricate the pins on the steps once a month.
- Use a silicone-based lubricant only (or we recommend Klüber Summit Hysyn GF 32). Do not use
generic lubricants, do not use solvents.
- Move the step downwards, to the position shown in the illustration.
- Apply oil to every opening in the hinge.
- Repeat for each of the 8 steps.
Warning
Before placing the product back in service, remove any excess lubricant from the
surface of the steps with a cloth.
