Technogamma tPell, Руководство пользователя

Страница: 4 / 20

Turning the device on
If the controller is in OFF mode and 60 seconds
have passed since the last user interaction, the
current time and temperature are shown on the
display.
Fig 3 Controller turned off
Pressing any button shows the main screen
(Fig 2).
Press and hold the power button in order to
turn on the controller. A menu showing the modes is
displayed, the active is AUTO (Fig 4). Hold the
button depressed for 3 sec in order to confirm the
turning on of the device. If you want to switch to ON
mode, use the navigation buttons to select it, then
hold the
button.
To turn the device off follow the same procedure.
When the mode is changed the beeper signals the
new mode is accepted.
Fig 4 Turning ON
Temperature set point
If the current mode is ON, use the buttons /
to increase / decrease the temperature set point
(the icon indicates the temperature can be
changed). In AUTO mode, the temperature is fixed by
the week timer
or the external thermostat.
Quick menu
Fig 5 Quick menu
To access the Quick menu , press the button
from the Main screen. For navigation use the buttons
/ .
Maximum power
The controller modulates the current operating
power so the temperature set point is reached. The
maximum power can be limited (5 – maximum, 1 –
minimum). Use the buttons
/ to decrease /
increase the maximum power. Pressing the button
sets the maximum value.
Bunker
The fuel level inside the bunker declines as the
device is operating. In order to change the fuel level
after loading it with pellets, use the buttons
/
to increase / decrease the fuel level by 5%. Press the
button
to increase the pellets level by 15 kg
(1 bag).
Service
Indicates the remaining pellets quantity remaining
to the next servicing of the device, alongside with the
last date of servicing. Negative value means that the
service period is overdue, indicated on the main
screen by blinking icon
.
When you have serviced the device, press to
reset the counter and the date.
4 Using the device