Technobake Roastrunner Скачать руководство пользователя страница 3

Страница: 3 / 4

3 Technobake Pty 11/18 Hinkler Court, Brendale, Qld 07 3205 9055

8. Use ‘locktight’ on thread of screws, tighten bracket in place.

9. Fit replacement door handle on the new pin.

10. Adjust ball latch so it sits touching ball rider plate.

Ball
rider
plate

Ball

Latch

Door handle ear

must be past the

White ball roller
By 1 to 4 mm.

Содержание Roastrunner

Страница 1: ...no up or down movement 2 Remove outer door glass Take note of mounting hole position in hinges for when you re refit the glass 3 Using replacement handle and lug position lug in place and check it si...

Страница 2: ...using a centre pop to mark centre then drill 3mm pilot hole then Drill through then with 8mm bit Drill right through 6 Bolt bracket in place using supplied bolts 16mmx8 mm tighten bolt to fix bracket...

Страница 3: ...055 8 Use locktight on thread of screws tighten bracket in place 9 Fit replacement door handle on the new pin 10 Adjust ball latch so it sits touching ball rider plate Ball rider plate Ball Latch Door...

Страница 4: ...so door is firm to shut but not stressing the latch 12 Check door safety switches on bottom of door are aligned correctly and no more than 2mm gap between sensors Must not be touching Check door switc...