Press any key to stop the alert sound, the alert symbol and corresponding temperature still
flash until the temperature is out of alert range
Or Press
“MODE”
to switch to the
“Temperature alert mode”, press and hold the
“MODE”
key to enter setup, then press
“UP”
or
“DOWN”
to deactivate the alert
12/24 hours mode
The time display can be in 12
（
AM/PM
）
or 24 hours mode, please follow the
“Manual
set-up
” section to select
°C/°F temperature display
The temperature display can be in °C or °F, please follow the
“Manual set-up” section to
select.
Max. / Min. for the indoor/outdoor temperature and humidity
Press
“MODE”
to switch to
“Time display” / “Indoor temperature alert” / “Outdoor
temperature alert” mode
Press
“UP”
to display indoor and outdoor max temperature and humidity,
Press
”UP”
again to display indoor and outdoor min temperature and humidity
Hold
“UP”
for more than 3 seconds to clear up the max./min.
Wind speed in mph/kmh (0~256kmh)
The wind speed can be shown in
mph
and
kmh
, please follow the
“Manual set-up”
section to select
mph/kmh,
the display of the speed is updated in case of the sensor
updated every 1 minute.
Wind direction
There will be 16 wind directions, the display of the direction is updated in case of the
sensor updated every 1 minutes
Rainfall display ( 0~999.99mm)
Rain fall can be shown in
mm
and
inch
, please follow the
“Manual set-up” section to
select the
mm/inch
.
Press
“MODE”
to switch
to “Time display” mode.
Press
“DOWN
” to switch to 1Hour, press again to 24 Hour, then Total wind speed and
rainfall
