Techno-Isel Educational DaVinci, Настройка

Страница: 26 / 27

17
Switch Settings
Switch settings for the baud rate and the acceleration rate may be changed, if necessary.
There are two switches for the baud rate, and two for the acceleration rate. All four
switches are found on the same DIP switch, which is located on the left leg of the DaVinci,
behind the panel.
(See diagram 6 below.)
Diagram 6: DIP Switch For Baud And Acceleration Rates
The DIP switch contains eight switches: 1 and 2 set the baud rate, 3 and 4 set
acceleration, and switches 5 through 8 are non-functional.
Adjusting The Baud Rate
The position of switches 1 and 2 determine the communication speed, or baud rate . For the
default setting of 9600 baud, switch 1 is OFF, and switch 2 is ON. A setting of 4800 baud
requires switch 1 to be ON, and switch 2 to be OFF.
(Refer to Diagram 7 below.)
Diagram 7: Baud Rate Settings
Left leg
(panel removed)
(contains baud rate and
acceleration rate switches)
DIP switch
ON
ON
9600 Baud (DEFAULT)
4800 Baud
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8