Techno CNC Systems WinCNC, Руководство пользователя

Страница: 8 / 38

8 Call: 1-631-648-7481 or Visit: support.technocnc.com
Plasma User Manual
WinCNC
1.3 Unpack the computer and monitor and mount them on the
controller. The PC fits on the side shelf and the monitor rests on top.
Fig. 1.4
1.4 Plug the labelled cables
into their proper places. 2
labelled interface cables, 1
monitor and 2 USB for mouse
and keyboard.
II. Techno CNC Plasma Installation
1.1 The Electronics are housed in the large controller box as shown in
Figure 1.1. When unpacking the machine, avoid twisting the plastic conduit
that guides the cables to the motors.
1.2 Open the front and back of the controller box
See PC and Controller Interface Connections on page 25.
Machine and Controller Connections
1.5 The terminal for the 220 volt connection
is located at the bottom front of the box.
Fig. 1.1
Have a suitably qualified person connect the 220V to the
terminals. Make sure that all local electrical codes are obeyed.
For single phase machine, connect power to L1 and L3 only.
Fig. 1.3