TECHNISONIC INDUSTRIES LIMITED
TMS-110 Installation and Operating Instructions
TiL 15RE532 rev. D
7
2.6 INSTALLATION – ANTENNA
For best results, the antenna should be mounted as high as possible in the center of a flat
metallic surface at least 52” in diameter. Where this may not always be possible, mounting the
antenna in the center of the roof of most cars or trucks should give reasonable performance. The
antenna should be at least 52” from any other antenna. The 181299-1 antenna supplied with the
TMS-110 system can be assembled by the following procedure:
Drill a 3/8” hole where the antenna is to be installed.
Unpackage the antenna and disassemble the antenna base:
Press antenna base through the 3/8” hole and supplied washer:
Feed coax through the antenna base:
Slide the locking core over the coax and into the antenna base:
