Technisonic Industries Limited TFM-138, Инструкция по установке и эксплуатации

Страница: 2 / 44

General Specifications
Model Designation TFM-138 TFM-138B
Frequency Range 138.000 MHz to 174.000 MHz 138.000 MHz to 174.000 MHz
Tuning increments 2.5 kHz 2.5 kHz
Operating Mode F3E simplex or semi-duplex F3E simplex or semi-duplex
Channel spacing 25 kHz or 30 kHz as per applicable 12.5 kHz, 25 kHz or 30 kHz as per
FCC and DOC specifications applicable FCC and DOC spec.
Memory positions 100 channels 120 channels
Physical dimensions Approx. 8.0 in x 3.0 in x 5.75 in Approx. 8.0 in x 3.0 in x 5.75 in
Weight 3.1 Lbs. (1.4 Kg) 3.1 Lbs. (1.4 Kg)
Temperature range -45 o C to +70 0 C -45 o C to +70 0 C
Altitude 50,000 ft 50,000 ft
Power requirement 28 VDC 28 VDC
Receive - 600 ma Receive - 600 ma
1 Watt transmit - 1.3 amps 1 Watt transmit - 1.3 amps
10 Watts transmit - 2 amps 10 Watts transmit - 2 amps
Certification FCC and DOC Type approved FCC and DOC Type approved
Environmental Categories RTCA DO-160C (B2,D1)XXX(B,M,N)XXXXXXZBBXXXZXXX
Guard receiver 2 channel synthesized 2 channel synthesized
CTCSS squelch capability encodes/decodes all 63 available tones encodes/decodes all 63 available tones
DPL/DCS capability not available encodes/decodes all avail digital sq. codes
DTMF encoder All standard DTMF tones available All standard DTMF tones available
Audio output 500 mw into 600 Ohms 500 mw into 600 Ohms
Speaker output 2.5 Watts into 4 ohms 2.5 Watts into 4 ohms
Back lighting 28V (standard) or 5V (specify) 28V (standard) or 5V (specify)
Display Green (standard), red (optional) Green (standard), red (optional)
Minimum Performance Specifications
Main receiver
Sensitivity at 12 dB SINAD Better than 0.35 microvolts Better than 0.35 microvolts
Adjacent channel -78 dB for 25 kHz -78 dB for 25 kHz, -70 dB for 12.5 kHz
Spurious attenuation -90 dB below carrier -90 dB below carrier
Third order intermod -70 dB -70 dB
Image attenuation -80 dB -80 dB
FM acceptance + 6 kHz + 6 kHz
Hum and noise Better than 50 dB Better than 50 dB
Audio distortion Less than 5% Less than 5%
Ant conducted emission Less than -70 dBm Less than -70 dBm
Guard receiver
All specifications identical to main receiver
Transmitter
RF power output 1 Watt or 10 Watts 1 Watt or 10 Watts
Output impedance 50 Ohms 50 Ohms
Maximum deviation Limited to 5 kHz Limited to 2.5 kHz for 12.5 kHz channels
and 5 kHz for 25 kHz channels
Spurious attenuation -90 dB below carrier level -90 dB below carrier level
Frequency stability +0.0005% +0.00025%
Microphone circuit Carbon or equivalent Carbon or equivalent
Sidetone output 500 mw (max) into 600 ohms 500 mw (max) into 600 ohms
Harmonic attenuation -65 dB below carrier level -65 dB below carrier level
FM hum and noise -40 dB -40 dB
Audio input 50 mV at 2.5 kHz into 200 ohm circuit 50 mV at 2.5 kHz into 200 ohm circuit for
for +3.5 kHz deviation, adjustable +3.5 kHz deviation (25 kHz mode).
50 mV AT 2.5 kHz into 200 ohm circuit for
+2.0 kHz (12.5 kHz mode), adjustable
Audio distortion Less than 5% Less than 5 %
Specifications subject to change without notice
DPL is a trademark of Motorola Corporatrion
Technisonic Industries Ltd .
2 40 Traders Blvd, Mississauga, Ontario L4Z 1 W7 Canada
Ph: 905 890-2113 Fax: 905 890-5338 www.til.ca