TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-136A Installation Instructions
Page 2-7
TiL 09RE404 Rev C Issue 1
J2:
Boot Program Enable - factory set
DO NOT INSTALL
J4: Option
Jumpers:
1-2 Maintenance Mode Enable -
DO NOT INSTALL IN AIRFRAME, BENCH ONLY
2-4
Factory Use Only – DO NOT INSTALL
5-6 n/u reserved
R8:
Main Rx Audio adjust - factory set
R10:
Tx Mic Audio Level Adjust – factory set
R11: Guard Rx Audio adjust – factory set
R17:
RF Low power adjust – factory set
R18:
RF High power adjust – factory set
R56:
DTMF Level Adjust – factory set
FIGURE 2-4
Control points for the TDFM-136A MCU Board
