ACCESS/A A710X / A711X Installation & Operating Instructions
06RE387 rev. B
Technisonic Industries ltd. Copyright 2007 BY TiL ALL RIGHTS RESERVED
Page 3-3
3.1.3
A711X RX MONITOR LEVEL CONTROLS
The operation of the
A711X
control differs slightly from the
A710X
, in that
individual receive
monitor controls
are provided to adjust the level for each of the 7 transceivers. These controls
normally go to approximately 2-5% level at the minimum setting (not off), but can be strapped
internally to go fully off, if required. Selecting the input “off” is normally done by the setting of the RX
monitor switch, not the level control. This is a safety feature, to prevent accidental total loss of
incoming communication due to an inadvertently low level pot setting.
FIGURE 3-3 A711X RX MONITOR LEVEL CONTROLS
