4
When making any settings and carrying out any installation work, please observe the other enclosed
instructions, especially the safety instructions they contain.
Subject to technical modifications as well as typographical and printing errors. This manual is only
valid for devices with the corresponding firmware version. Our products are subject to constant tech-
nical advancement and further development. We therefore reserve the right to make changes without
prior notice.
© 2019
In this menu you need to look out for the bold border again. In the ex-
ample there is a border around
Program
. The number
0
below it is the
set value.
If the program is to be changed, press the dial in the usual way while
the bold border is shown around "
Program
".
The display
0-999
is the setting range. The number below this (with a
red border) is the current value.
If the dial is turned clockwise, the program number is increased by one
with each notch. Turn anti-clockwise to decrease the number.
Once the required number has been reached, confirm by pressing the
dial.
Press Back to cancel the entry.
The program has been set successfully.
After setting the program, the
Pa-
rameters
at the
Technician level
need to be adapted according to
the selected program and the local
conditions.
