TechniSat ST 6002 S, Руководство по эксплуатации

Страница: 20 / 46

TechniSat ST 6002 S
Frequency shift
It is possible to tune in the receiver to the frequency of the LNB
should it not be supplying the exact IF-frequency:
1. Select a channel which is already stored, and which is trans-
mitting in the 11GHz range. Switch the receiver into stand-by
mode and call up the System Menu by holding down the
buttons on the front panel simultaneously
2. First select the option “Change system options”, then “Glo-
bal shift LNB”. The blue background disappears and you can
view the selected channel.
3. Tune the frequency up or down using the buttons
(AFC +/-15, 0.25MHz steps). Once you have achieved the best
picture quality you can store the frequency shift by pressing
ENTER.
NOTE: This affects all 11GHz channels
4. You can also alter the 12GHz range. First select a 12GHz
channel and proceed as above. Press CNCL to leave System
Menu
21
E N T E R
E N T E R
C N C L