Operating breaks
During a thunderstorm, or when the unit is not being used for
an extended period of time, please disconnect the equipment
from the mains power supply.
Before installing and operating the equipment,
please check you have received all compo-
nents!!!
The package contains the following items:
1 SkyFunk 4 transmitter
1 SkyFunk 4 receiver
2 mains adapter units
3 adapter cables cinch <---> Scart
1 IR extension
1 guarantee card
1 operating manual
2 General
The SkyFunk 4 system serves to provide wireless transmissi-
on of video and stereo audio signals. To do this, the video
and audio signals of one or two sources (e.g. a satellite
receiver or a video recorder) are converted by the transmitter
to a frequency of approx. 2,4 GHz, and transmitted to the
SkyFunk receiver. This again converts the signals into nor-
mal video and audio signals, which can then be reproduced
via the Scart socket of a television set. If your television set
is not equipped with a Scart socket, you can purchase an
external modulator, available in the trade, and receive the
signal via the HF input of your television set.
In the same manner, the control signals of the existing remo-
te control are converted at the receiver end into the return
channel frequency of 434 MHz, and transmitted to the signal
source, thus allowing you to control the picture/signal source
(e.g. a satellite receiver or video recorder).
4 channels are available for the transmission of audio, video
and remote control signals, these can be set by means of
DIP switches located on the SkyFunk 4 units.
Please note that a transmitter and receiver pair
must always be operated on the same AV and IR
channels (Channel 1-4) - see Point 5.1 and 5.2.
3
This product bears the CE logo, and complies with all relevant EU standards
and regulations.
Subject to change without notice, not responsible for printing errors. Correct as
at 01/06
SkyFunk and TechniSat are registered trademarks of
TechniSat Digital GmbH
Postfach 560 -D- 54541 Daun/Germany
www.technisat.de