TechniSat DIGITRADIO 52, Руководство пользователя

Страница: 59 / 123

116 117
DE
EN
FR
NL
10.5 SW version
Under SW Version you can check which SW version is currently installed.
>
Hold the SELECT/MENU button down briefly. Use the < or > buttons to select the
[SW Version] item and press the SELECT/MENU button .
> The software version currently installed will now be displayed.
> Exit the display by holding down the SELECT/MENU button.
10.4 Factory settings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device to
Factory Settings to delete all the saved stations and then launch a new scan.
> Hold the SELECT/MENU button down briefly. Use the < or > buttons to select the
[Factory setting] item and press the SELECT/MENU button .
Using the < or > buttons, select the [Y] (Yes) or > [N] (No) item to reset to the factory
setting and press the SELECT/MENU button.
All previously stored stations and settings will now be deleted. The device is now
in the same status as when delivered.
> The display will show [Restart ...] and the device will start with the language
selection [Language] . > Use the < or > buttons to select one of the available
languages and confirm by pressing the SELECT/MENU button. The device then
automatically performs a complete scan in DAB mode. While scanning, the
display information shows the progress as well as the number of digital radio
stations detected. After completing the station scan, the first DAB+ channel is
played.