7
Additional channel information
Each time you change channels, an information box will be displayed briefly, showing the channel and the
channel name of the channel selected. In addition, other channel properties will be indicated, such as for
Video text, for widescreen broadcasts and for encrypted channels. If a TV broadcast is available in multi-
ple languages or with multiple audio channels, or if multiple radio channels are available on a single radio
station this will be displayed on screen. You may then proceed as follows to select a different language or
a different audio channel:
> Press the Option key. A list will now be displayed on screen, indicating the languages currently avail-
able.
> Use the arrow keys up/down to highlight the desired language or the desired radio station and confirm
by pressing OK.
You may now listen to the channel in the language selected. Your digital receiver is also equipped to
receive monaural channels.
> Use the arrow keys left/right to choose between Mono channel 1, Mono channel 2 and Stereo.
Volume control
> Adjust the volume of your digital receiver using the key to increase the volume, and Volume –
to decrease the volume.
> Press the mute on/off key to switch the sound on or off.
TV/Radio switching
> By pressing the TV/Radio button, you can switch between TV and Radio operations.
Access Electronic Channel Guide (EPG):
> Press the SFI/EPG key on the remote control of the digital receiver.
The Electronic Channel Guide then appears on the screen. The channels you have selected, or those
of the factory default settings, will be shown with their current channels. You can now also use the EPG
function to obtain information on the contents of various channels. In addition, you may use the EPG func-
tions to select a desired channel, to pre-select a channel, or to set a timer for a channel.
Exit EPG
> Press either the Menu or the TV/Radio key to return to normal operation.
Hard disk operation
Recording
Please note!!! Simultaneous reception of two encrypted channels
With your receiver, it is also possible, with just one CI module and one valid Smartcard, to receive two en-
crypted channels at the same time. However, this is only possible if you use a CI module with the “Dual-
Decrypt” function (see details of the CI module manufacturer), both the desired channels are located at
the samesatellite frequency and the CI dual decryption function has been correctly selected.
Please ensure that the receiver has acquired the time. During operation, this is displayed in the Infobox
and during standby operation on the display. If this is not the case, leave the receiver switched on to a se-
lected channel for approximately 30 seconds, so that the receiver can acquire the current time.
