TechniSat DigiCorder S1 Скачать руководство пользователя страница 3

Installation – options. 

The EXT controller can be programmed with different options, for use in different setups. 
Programming of an option is usually done when installing the controller, not during daily 
use. To programme an option, 5 keys must be pressed within 2 seconds. 
 
 
 
 

Available options: 

 

Menu button option. 

Some B&O TV catches the Menu button, before the command is echoed out via the scart 
connector to the EXT controller. This gives a conflict as the TV’s menu is then being 
displayed instead of the receivers menu. In these cases the direct menu button should be 
deactivated. 

 
eOr80

 Deactivate Menu 

eOr81

 Activate Menu 

 
 
 
Power off option. 

The receiver can power off when the TV is powered off. If the receiver is used in a setup 
with link rooms or recorders, this might not be practical. 
This option can deactivate automatic power off. 

 
eOr70

 Deactivate Poff 

eOr71

 Activate Poff 

 
 
 
Programme Zapping option 

The yellow and blue buttons are being used as programme zapping buttons. In this waythe 
up, down, left and right buttons are   available in all menus as well as the  pro-gramme 
zapping buttons.  
 
This is the OneRemote layout and compa-tible with other OneRemote controllers. 
Some people might prefer to have the programme zapping buttons on the up and down 
buttons.  
This option exchanges the functions of the blue/ yellow and the up/ down buttons. 

 

eOr91

 Coloured 

eOr90

 Up/ down

Содержание DigiCorder S1

Страница 1: ...sat DigiCorder S1 S2 HD S2 Plus Beo4 and Beolink 1000 are remote control terminals from Bang Olufsen OneRemote supplies interface modules that allow third party equipment to be operated via a Bang Olufsen remote control system Made in Denmark by www oneremote dk ...

Страница 2: ...rols With your beocompatible receiver connected to a Bang Olufsen TV you may operate it with a Bang Olufsen Beo4 or Beo5 remote control Operation in a Beolink Videosystem In a Bang Olufsen Beolink Videosystem full operability is ensured in all link rooms via this solution Operating with Beo4 or Beo5 Beo4 does not have as many keys as the receiver s original remote control Thus certain Beo4 keys ha...

Страница 3: ... Deactivate Menu eOr81 Activate Menu Power off option The receiver can power off when the TV is powered off If the receiver is used in a setup with link rooms or recorders this might not be practical This option can deactivate automatic power off eOr70 Deactivate Poff eOr71 Activate Poff Programme Zapping option The yellow and blue buttons are being used as programme zapping buttons In this waythe...

Страница 4: ...ght prefer to have the programme zapping buttons on the up and down buttons To exchange the functions of the blue yellow and the up down buttons see option programming on page 3 2 As the coloured buttons has been assigned other direct functions a O has to be pressed first to get the coloured operation OQcorresponds to the green function on the receivers remote control Recording and playback o Play...

Отзывы: