3.1.7 Security code
Your TechniSat WERRA 1 is equipped with a security code to prevent operation
by unauthorized persons after the radio has been removed or disconnected
from the power supply.
The device may be operated again when the code number has been
entered.
Attention: The security code is not activated when the
device is supplied!
Adhere the attached sticker to the side window of your car to scare off
potential thieves.
Entering the code:
The specific code of your TechniSat WERRA 1 is shown on the enclosed code
card. Never keep this card together with your car radio as the security code
will have no effect in case of a theft.
9
3 Detailed instructions
3 Detailed instructions
S
te
p
1
Ste p 2
S t e p 3
Switch on
Select
number
Re-confirm
every digit
Qualität Made in Germany
Keep this card safely (not in your car)
Deponieren Sie die Karte an einem sicheren Platz
(nicht im Auto)
Autoradio TechniSat WERRA 1
IID
D-
-C
Ca
ar
rd
d
Anti-Diebstahlcode
- Turn on the radio as described in 3.1.1.
If the device is locked “C*“ will appear on the display.
- Enter the first digit of the code number by pushing the
or
button
- Confirm this by pushing the .
button.
- Now enter the remaining three digits of the code as described above
and store each of them by pushing the
button.
Do not forget to also push the
button after having entered the last digit.
After approx. 25 seconds a signal tone sounds to finally confirm the input. If the
device is switched off before this confirmation is received it is necessary to
enter the number again when the unit is switched on.
BAND
BAND
BAND
>>
<<
Bed.Anl. Werra1 englisch 09.04.1998 11:53 Uhr Seite 9
