Notice
All procedures, data, information, drawings, specifications or other material, whether accompanying this document or separately supplied in
furtherance of this document, contain confidential and proprietary information which (i) is the property of TechnipFMC plc (TechnipFMC) and its
subsidiaries, (ii) is disclosed by TechnipFMC only in confidence, and (iii) except as TechnipFMC may otherwise permit in writing, is to be used,
disclosed or copied only to the extent necessary for the evaluation and use thereof by the recipient.
The foregoing shall not apply to any such material to the extent that the contents (i) are now or subsequently become available to the public
without payment, (ii) were previously known to the recipient, or (iii) subsequently become otherwise known to the recipient without restriction.
This document is based on information available at the time of its publication. While efforts have been made to be accurate, the information
contained herein does not purport to cover all details or variations in hardware and software, nor to provide for every possible contingency in
connection with installation, operation and maintenance.
TechnipFMC makes no representation or warranty, either expressed or implied, with respect to, and assumes no responsibility for, the
accuracy, completeness, or sufficiency of the information contained herein. No warranties of merchantability or fitness for a particular purpose
shall apply.
Smith Meter is a registered trademark. The TechnipFMC logo is a trademark.
This document takes precedence over and supersedes in their entirety all previous versions or revisions.
Bulletin MN0A005 Issue/Rev. 0.0 (4/22)
Copyright © 2022 TechnipFMC plc. All rights reserved.
TechnipFMC.com
TechnipFMC Corporate Headquarters
13460 Lockwood Road
Building S01
Houston, TX 77044 USA
+1 281.591.4000
USA Operations
1602 Wagner Avenue
Erie, PA 16510 USA
+1 814.898.5000
Germany Operations
Smith Meter GmbH
Regentstrasse 1
25474 Ellerbek, Germany
+49 4101 304.0
