Technimount System PRO 150 Series, Руководство пользователя

Страница: 18 / 30

18 BP150 UG 202108-01 www.technimount.com
INSTALLATION OF THE BRACKET ONTO THE MAXBLEND OXYGEN BLENDER
(CONTINUED)
4. Install the U-block of the main assembly by sliding
it onto the rear block of the medical device.
5. Align the main assembly with the rear block
of the medical device and the U-block already
installed.
6. Install the main assembly at the rear of the
medical device.
7. Align the screws and screw holes from the main
assembly.
8. Install the four (4) Black Oxide Stainless Steel
Flat Head Phillips Screws 10-32 x 5/6" with the
U-block. (tightening will be at the end).
NOTE
Put a few drops of medium strength thread-locking
adhesive (blue Loctite 242) on each screw before
installation to prevent the screws from loosening
during normal use.
INSTALLATION GUIDE