P.08
P.09
Install Washer Dryer Machine
Unpacking the washer dryer machine
Unpack your washer dryer machine and check if there is any damage during the transportation.
Also make sure that all the items (as shown in Page 5) in the attached bag are received.
If there is any damage to the
machine during the transportation, or any item is
missing, please contact the local dealer immediately.
Dispose the packing materials
The packing materials of this machine may be dangerous to kids. Please dispose them
properly and avoid easy touch by kids. Please dispose the related packing materials
according to the relevant local regulations. Please do no throw the packing materials
away together with the other daily living rubbishes.
Remove transport bolts
Before using this
machine, transport
must be removed from the backside of
this machine. Please take the following steps to
remove the bolts:
1.Loosen all bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Select the location
Before installing the
machine, the location characterized as follows shall be
selected:
- Rigid, dry, and level surface (if not level, please make it level with reference to the
following figure “Adjust Leg”)
- Avoid direct sunlight
- Sufficient ventilation
- Room temperature is above 0 C
- Keep far away from the heat resources such as coal or gas.
Make sure that the
machine will not stand on power cord.
Do not install the washing machine on the carpet floor.
Adjust Leg
1.When positioning the
machine, please
first check if the legs are closely attached to the
cabinet. If not, please turn them to their original
positions with hand or spanner and tighten the
nuts with spanner.
2.After positioning the
machine,
four corners on top cover of
in sequence. If the washing machine
stable when being pressed, this leg shall be
adjusted.
washer dryer
washer dryer
bolts
washer dryer
washer dryer
washer dryer
washer dryer
press
washer dryer
machine
is not
Overview of Washing Machine
Inlet Pipe H (optional)
Inlet Pipe C
Transport Hole Plug
Outlet Hose Support
(
)
optional
Component
Accessories
Power Plug
Service Panel
Door
Control Panel
Detergent Drawer
Outlet Hose
Detergent Box
