IMPORTANT SAFETY INFORMATION
5
Read these instructions.
WARNING: DANGER OF RADIATION
INSTALLING BATTERIES
Keep these instructions.
These labels tell you that the unit contains a laser component.
1. Open the battery
Heed all warnings.
Opening the lid and defeating the safety interlocks will expose
compartment cover and
the user to radiation from the laser beam. Do not stare into the
insert two "AA" alkaline
Follow all instructions.
laser while it is operating.
batteries in the battery
Clean only with dry cloth.
compartment. Follow the
Install in accordance with the manufacturer's instructions.
polarity as indicated in the
battery compartment.
Do not install near any heat sources such as radiators, or any
apparatus that produces heat.
2. Close the battery
This equipment generates, uses and can radiate radio
compartment cover.
Use only attachments/accessories specified by the
frequency energy and, if not installed and used in accordance
manufacturer.
with the instructions, may cause harmful interference to radio
Refer all servicing to qualified service personnel. Servicing is
or television reception which can be determined by tuning the
required when the apparatus has been damaged in any way,
equipment off and on. The user is encouraged to try to correct
such as liquid has been spilled or objects have fallen into the
the interference by one or more of the following measures:
apparatus, the apparatus has been exposed to rain or
Re-orientate or re-locate the receiving antenna. Increase the
moisture, does not operate normally, or has been dropped.
separation between the equipment and the receiver. Connect
Warning: To reduce the risk of fire or electrical shock, do not
the equipment into an outlet on a circuit different from that to
expose this product to rain or moisture. The product must not
which the receiver is connected. Consult the dealer or an
LOW BATTERY ALERT. When the low battery indicator
be exposed to dripping and splashing and no object filled with
experienced radio/TV technician for help.
appears at the bottom right of the display panel the batteries
liquids should be placed on the product.
must be replaced as CD player will not function properly.
BATTERIES:
Do not leave batteries for extended periods in
Caution: Changes or modifications not expressly approved by
the apparatus as they can leak or corrode causing damage to
AC OPERATION
the manufacturer could void the user's authority to operate
the unit. Exhausted batteries must be treated with care and
Use only an approved UK 6V DC
this device.
disposed of according to any safety or recycling regulations in
power adaptor (not supplied). Ensure
force in your area. NEVER throw batteries into the general
the polarity of the DC connector
rubbish, or a fire, or leave them lying around.
LISTENING TO MUSIC AT EXTREMELY HIGH
matches the player (see diagram).
LEVELS FOR EXTENDED PERIODS CAN
Do not mix battery types. When inserting batteries, replace all
Plug the adaptor into the player and
SEVERELY DAMAGE YOUR HEARING.
at the same time. Do not mix old and new batteries.
then plug the adaptor into the mains
Weak batteries can leak and severely damage the unit.
supply before turning on the power.
POWER SOURCES
Approx. 8 hrs.
Alkaline “AA”
Ave rage Playing Time
(Con tinu ou s Pl ay )
Battery Type
Normal Play
Anti-Skip
Mode
Approx. 9 hrs.
Approx. 3.5 hrs. Approx. 2.5 hrs.
Ni-CAD Rechargeable
(min spec. 1.2V - 650mA)
Note: Zinc/Carbon, or Zinc/Chloride batteries should not be
used as their use will result in extremely short playing times.
BATT ERY GUI DE
+
–
DC6V
After Use
PROGRAM PLAY allows selected tracks on the disc to be played in any
desired order. Programming can be set in STOP mode or normal play mode.
Switch the CD player off. Wait for the disc to
To set up a program:
stop spinning. Hold the edge and gently press
$
Press the PROG button . PGM starts flashing.
the centre pivot to pick up the disc.
$
Press or to select the desired track.
Remove the disc and store it in its packing. Do
not leave a disc in the player for extended
$
When the desired track is displayed:
Press the
periods.
PROG button to enter the track into the program.
The track No. display changes to 00 again but the
Cleaning the Cabinet
program register has advanced to 02
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a
$
Repeat steps 2 and 3 to program the order of more
weak solution of neutral detergent and water, and then wipe clean.
tracks. Up to 20 tracks can be programmed into
Cleaning the Lens
memory.
A dirty lens will cause sound skipping and if the lens is very dirty, the CD may
To complete programming and start play
not work. Open the disc cover and clean the lens as shown.:
$
Press The PGM stops flashing and play begins
Dust or Dry Particles:
Using a camera
To clear programming
lens brush/blower, blow on the lens
$
Press STOP
several times and wipe it lightly with
the brush to remove dust. Blow on the
lens one more time.
Fingerprints:
If the lens cannot be
cleaned by using a brush/blower, use a
dry cotton swab starting from the
middle and working to the edge.
Fingerprints should be carefully wiped
from the surface of disc with a soft cloth.
Wipe in a straight motion from the centre
to the edge.
PROGRAM PLAY
CARE AND MAINTENANCE
