Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a slightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer's instructions.
Do not install or operate near any heat sources such as radiators,
stoves, or other apparatus that produce heat.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as
the power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.
Warning: To reduce the risk of fire or electrical shock, do not expose
this product to rain or moisture. The product must not be exposed to
dripping and splashing and no object filled with liquids such as a
vase of flowers should be placed on the product.
No naked flame sources such as candles should be placed on the
product.
Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this device.
Usage of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous exposure.
These labels tell you that the unit contains a Laser component. Do
not stare at the laser lens.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio ommunication.
However, this is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The mains operating voltage of this unit is on the
rating plate on the rear. In the UK this is 230/240 V.
he appliance cord is terminated with a UK approved mains plug
fitted with a 3A fuse. If
DO NOT connect either of these wires to the terminal marked E, or
coloured green or green and yellow, or marked by the earth symbol.
Class II construction double insulated. This product must
not be connected to earth.
Caution:
Caution:
IMPORTANT
Mains Supply:
ELECTRICAL INFORMATION
T
the fuse needs to be replaced, an ASTA or BSI
approved BS1362 fuse rated at 3A must be used. If you need to
change the mains plug, remove the fuse and dispose of this plug
safely immediately after cutting it from the cord.
The wires in the mains lead are coloured in accordance with the
code: Blue: NEUTRAL; Brown: LIVE:
As these colours may not correspond to the coloured markings
identifying the terminals in your plug, proceed as follows:
The BLUE wire must be connected to the terminal marked with the
letter N or coloured BLUE or BLACK. The BROWN wire must be
connected to the terminal marked with the letter L or coloured
BROWN or RED.
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO
NOT REMOVE COVER (OR BACK)
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
3A FUSE
BS 1362
BROWN
(Live)
BLUE
(Neutral)
IMPORTANT SAFETY INFORMATION
2
FM RECEPTION
AM RECEPTION
!
!
!
!
!
!
!
Set the CD/RADIO Switch to ‘
’
Set the AM/FM selector to ‘
’
Select the desired station using the Tuning Knob.
Switch the AM/FM switch to ‘
’ This sets the radio to
mono and will eliminate most of the noise.
Move the antenna cable round for the best
reception.
Set the CD/RADIO Switch to ‘
’
Set the AM/FM selector to ‘
’ (Medium Wave)
Select the desired station using the Tuning Knob.
RADIO
FM STEREO
FM .
RADIO
AM
The display shows the station frequency. If the station is in
stereo the FM stereo indicator lights.
In a bad signal area, stereo reception may be noisy.
The antenna is required only for FM reception.
Medium Wave (AM) reception is liable to interference from
cars, etc. so position the main unit for best reception.
NOTE:
ADVANCED CD PLAY
REPEATING A TRACK OR A COMPLETE DISC
PROGRAMMED DISC PLAY
Playing the Program:
To cancel and erase a program from the memory:
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
Press the REPEAT button to cycle the repeat mode:
REPEAT TRACK
REPEAT ALL
REPEAT OFF
Press STOP
to cancel Repeat and stop the disc.
Program play can only be selected when the CD is
stopped. You may program up to 30 tracks.
Press the PROGRAM Button.
PROGRAM
Press SKIP
or
to select a track
Press PROGRAM to store the selection.
0
Choose another track (or the same track).
Press PROGRAM to store the selection.
Press PLAY/PAUSE The program will play once and
stop.
Press STOP
to interrupt a program.
Press PLAY/PAUSE to re-instate the program.
You can change tracks and search for passages within
the program. REPEAT mode is also available.
Press STOP
twice; or lift the CD lid.
twice
once
The display flashes 01
and the
indicator lights up.
The display flashes 2
.
The display indicates the current track in play.
The
display indicates the number of tracks on the disc.
USING THE RADIO
ALTERING THE VOLUME AND TONE
VOLUME
BASS BOOST
!
!
Press
to increase or decrease the volume.
To increase the bass effect set the BASS switch to ON.
PLAYING THE SYSTEM AT VERY HIGH LEVELS CAN DAMAGE YOUR HEARING!
VOLUME UP/DOWN
Do not set the volume too high. If the sound begins to distort or break up, reduce
the volume IMMEDIATELY. If you set the BASS switch to ON at high volumes you
increase the likelihood of distortion.
7
