background image

8

  DAB & FM DISPLAY MODES

DAB DISPLAY MODES

When playing a DAB station you can change the information 
on the display by changing the display mode.

To change the display mode:

Press the 

MENU/INFO

 button repeatedly to cycle through the 

options listed in the chart below.

DLS (SCROLLING TEXT): This is a scrolling message giving real-
time information - song titles, news headlines, etc.
MULTIPLEX NAME (GROUP NAME): is the name of the DAB 
Multiplex that is currently tuned.
MULTIPLEX  NUMBER/FREQ:  The  Multiplex  number  and 
Frequency display shows the multiplex channel number and 
the multiplex frequency for the station currently tuned.
BIT RATE: DAB allows broadcasters to vary the BIT RATE (or 
the amount by which an audio signal can be compressed) 
depending on the type of broadcast. This enables the amount 
of stations on a multiplex to be maximised. Speech and News 
are often broadcast at a lower Bit Rate; music needs a higher 
Bit Rate for good fidelity.
SIGNAL STRENGTH: This setting will display a signal strength 
bargraph. The longer the bargraph, the stronger the signal. 
Setting the display to show signal strength is useful when 
setting up the aerial for the strongest signal.
TIME AND DATE: Time and date are  updated by  broadcasted 
information.
PROGRAMME TYPE: This describes (when available) the style 
of the programme being broadcast.

FM DISPLAY MODES

When playing an FM station you can change the information 
on the display by changing the display mode.

To change the display mode:

Press the 

MENU/INFO

 button repeatedly to cycle through the 

options listed in the chart below.

FM STEREO MODE: In this mode the current FM stereo mode 
is shown, Mono or Auto (Stereo).
SIGNAL STRENGTH: This setting will display a signal strength 
bargraph. The longer the bargraph, the stronger the signal. 
Setting the display to show signal strength is useful when 
setting up the aerial for the strongest signal.
FREQUENCY: The Frequency display shows the frequency for 
the station currently tuned.

DLS (SCROLLING TEXT)

MULTIPLEX NUMBER/FREQ

AUDIO BIT RATE/ENCODING

TIME & DATE

PROGRAMME TYPE

MULTIPLEX NAME

SIGNAL STRENGTH

FM STEREO MODE

FREQUENCY

SIGNAL STRENGTH

Содержание MC-121IDAB

























Отзывы: