Technika DR1302, Руководство пользователя

Страница: 5 / 12

3
UNPACKING
Carefully unpack the unit. If it is damaged, please
return it to your nearest Tesco store for replacement.
Remember to take your purchase receipt with you.
Retain the User Handbook. If you pass the unit on to a
third party make sure you pass on the handbook.
We suggest you retain the packaging. If you dispose of
it, do so having regard to any recycling regulations in
your area.
CONTENTS
The carton should contain:
The DR1302 digital radio •
AC Adaptor •
Operating Manual •
If any items are missing or damaged, contact your
nearest TESCO store for a replacement. Have your
receipt ready when you call. Retain the packaging. If
you dispose of it, do so having regard to any recycling
regulations in your area.
LOCATION
Place the unit on dry stable surface away from heat
and damp and where it is unlikely to fall or be knocked
over.
GETTING STARTED
CONNECTING POWER
Check that the mains voltage marked on the rating •
plate of the AC adaptor is the same as the voltage
in your area.
Plug the DC cable from the AC adaptor into the DC
•
5V IN jack on the back panel.
Plug the AC adaptor into the wall socket and switch
•
the mains power on.
Initialisation begins -
A welcome message is displayed.
The radio will tune to the last station played.
DAB/FM AERIAL
Before using your radio for DAB or FM reception, always
fully extend the telescopic aerial.
The telescopic aerial has a swivel base to enable it to be
adjusted to different positions for the clearest sound.
AUTO-DIM DISPLAY
The display includes an auto-dim feature.
When one of the controls is adjusted, the display will
automatically brighten for a few seconds.
When you have finished adjusting the controls, there
will be a short delay, then the display will fade to a
lower brightness.
STANDBY CONTROL
Switching the radio on:
Press the • button to switch on the radio.
The radio will re-tune to the last station playing.
Setting the radio to Standby:
Press the • button to set the radio to Standby.
The time and date will be displayed.