Technika DAB-129ID, Руководство пользователя

Страница: 10 / 20

8
LISTENING TO FM RADIO STATION PRESETS
DAB and FM presets
Using the remote control, your radio can store up to 10 of your
favourite stations as presets on both the DAB and FM bands
for quick recall. Direct access number buttons are available
for Presets 1 to 6. For this reason you may prefer to store your
most-used stations in Presets 1 to 6.
To quick store preset 1 to 6
Tune to the station you want to store as a preset. •
Press and • hold one of the NUMBER buttons.
To recall a preset 1 to 6
Press one of the • NUMBER buttons briefly .
The preset station will be tuned. If the preset selected is empty,
then the radio will continue to play the last selected station.
To store any preset 1-10
Tune to the station you want to store as a preset. •
Press and • hold the
}
/PRESET button.
‘Preset Stored’ will be displayed.
Press the •
M
or
N
button repeatedly to find the preset
number you want to store.
For each preset number the preset station currently stored will
be displayed or ‘Empty’ if none is stored.
Press the • SELECT/ENTER button to confirm if you want
to store the station in the displayed preset number.
To recall any preset 1-10
Press the •
}
/ PRESET button briefly .
Press the •
M
/UP or
N
/DOWN repeatedly to find the
preset number you want to play.
Press the
• SELECT button briefly to play the preset.
SOUND SOURCES
You can choose to listen to the following sources -
DAB radio •
FM radio •
iPod (when docked) •
Aux source (when connected via the rear panel AUX •
jack).
Selecting a source:
Press the •
FUNCTION
button on the front panel or
remote control repeatedly to scroll through the available
sources.
Your radio can also receive FM band radio stations and display
RDS data (where broadcast).
To change to the FM band
Press the •
FUNCTION
button repeatedly to select FM
mode.
To auto-tune to FM stations
Press the •
SCAN
button to search for the next station in
the band.
The radio will search and the tuning frequency will be displayed
whilst searching.
When a usable station is detected the radio will stop tuning and
play the station. If RDS data is present, the station name and
scrolling radio text will be displayed. If RDS data is not present,
the tuned frequency will be displayed.
To manually tune to FM stations
Press the •
M
or
N
button on the remote control to tune
the band in 50kHz steps.
STEREO/MONO RECEPTION
You can set your radio to switch automatically between
stereo and mono FM reception (Mono/Stereo mode) or to
receive in mono only (Mono Only mode). Setting to Mono
Only mode may improve sound quality in areas where a weak
aerial signal results in a high level of background noise. FM
audio mode selection is made via Audio Setting in the FM
menu. Refer to the FM Settings Menu section on page 15 for
more details of the FM menu.
SELECTING A SOURCE