Technika CP750SS, Инструкция по использованию и установке

Страница: 7 / 9

filters at a regular interval of 2 months by carrying out the following
instructions:
- Remove the filters from the cooker hood and wash them in a solution of
water and neutral liquid detergent, leaving to soak.
- Rinse thoroughly with warm water and leave to dry.
- The filters may also be washed in the dishwasher.
The aluminum panels may alter in color after several washes.
This is not cause for customer complaint or replacement of panels.
Clean the oil cup on a regular basis by removing the grease filters and
sliding out the plastic cup.
● Clean the fan and other surfaces of the cooker hood regularly using a
cloth moistened with denatured alcohol or non abrasive liquid detergent.
● Illumination installation is designed for use during cooking and not for
prolonged general illumination. Prolonged use of the illumination
notably reduces the duration of the lamps.
Use a flat blade screwdriver or any other appropriate tool to lift and
remove the overhead LED lamp fixture. Replace the faulty 1 watt LED
lamp. Use only LED lamp assembly as the original specification;
Return the LED lamp fixture to its position. (Fig.4) (Fig. 5)
●
COMANDS:
(Fig.6)
A
= OFF
B
= SPEED I
C
= SPEED II
D
= SPEED III
E
=LIGHT
When pressing the key B, the display light is flashing and please run in
SPEED 1.If you want to stop, you only press the key A.
When pressing the key E, the display light is flashing and then turn on the
light, If you want to turn off the light, you only press the key once again.
When the motor and the light work together or individually, press the key
A, and stop the activated functions of the timer automatically .The
display light is flashing countdown which will continue functioning for
15 minutes, and the motor and the lights will be turned off. For stopping
the timer, only press the key once again.
Manufacturers stated strictly that we refuse to take any responsibility
because of the results caused by any violation of the above procedures