Technika Bellissimo TBD4SS-4, Инструкция по эксплуатации

Страница: 13 / 22

11
NOTE:
It is dangerous to open the door when washing, because the hot water may scald you.
Open the door carefully. Hot steam may escape when the door is opened!
Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down around
15 minutes before removing from the appliance.
Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes.
In this way they will be cooler and the drying will be improved.
Unloading the dishwasher
It is normal that the dishwasher is wet inside.
Empty the lower basket first and than the upper one. This will avoid water dripping from the
upper basket onto the dishes in the lower one.
The Display window shows the state of the dishwasher:
a) Display window shows "-:--" --> stand by;
b) Display window shows "H:MM" and not blinking --> pause;
c) Display window shows "H:MM" and blinking --> run.
If display window shows error code after a warning sound(page 20th"Error code"), that indicates the
machine is out of order, please turn off the main power and water supply before calling a service.
A forgotten dish can be added any time before the detergent cup opens.
Please press the start button.
Do not open the door until the water spray action stops. Steam may rise out of the dishwasher.
Add forgotten dishes.
Close the door and Press the Start button to start washing.
4
3
2
1
1
Draw out the lower and upper basket, load the dishes and
push them back. It is commended that loading the lower
basket first, then the upper one.
3
Insert the plug into the socket.
The power supply is 240VAC 50HZ, the specification
of the socket is 0 250VAC. 1 A
5
Press the ON/OFF button
6
According to the soil level to choose the desired program
by pressing the program selection button.
2
With a little force to ensure the door is properly closed.
NOTE:
A click could be heard when the door is closed
perfectly.
8
When the washing is over, you can shut off the sw tch by
pressing on/off button.. i
Premise: A cycle that is underway can only be modified if it
has only been running for a short time. Otherwise, the detergent
may have already been released, and the appliance may have
already drained the wash water. If this is the case, the detergent
dispenser must be refilled (see the section entitled " Loading the
Detergent " ).
Press the start/reset button, then press current prog. button
more than three seconds to cancel the program , you can change
the program to the desired cycle setting (see the section entitled
" Starting a wash cycle. . . " ).
NOTE:
If you open the door when washing, the machine
will pause. When you close the door , the machine will keep on
working after 10 seconds.
If you open the door , the
machine will pause. And the machine will then continue to run only
if you press
after closing the door.
Press start/pause button to start a washing.
7
4
Turn on the water supply to full pressure