Technics SL-C700E, Руководство по обслуживанию

Страница: 30 / 41

30

Note when attaching the CD MECHA BLOCK
• When attaching the CD MECHA BLOCK, pass the FFC into
the gap between CD MECHA DRIVE PCB and MAIN PCB,
and then connect it to the "Coupler: P0102".
6.15. SPRING, CD LOADING UNIT
1. Remove the CD MECHA BLOCK.
(See 6. 14. CD MECHA BLOCK, DOOR, steps 1 and 2.)
2. Remove the coupler.
• Coupler: P105
3. Remove the screws for removal.
• Screw: 4

Note when attaching the SPRINGs (SILVER) and (GOLD)
• When attaching the SPRINGs (SILVER) and (GOLD), make
sure each position is correct.
6.16. INSULATOR, CD DRIVE UNIT
1. Remove the CD MECHA BLOCK.
(See 6. 14. CD MECHA BLOCK, DOOR, steps 1 and 2.)
2. Re move the SPRINGs and CD LOADING UNIT.
(See 6. 15. SPRING, CD LOADING UNIT, step 3.)
3. Remove the couplers.
4. Remove.
6.17. REAR PANEL
1. Remove screws A and screws B for removal.
• Screw A: 10
• Screw B: 2