Technics SL-1200MK7 Скачать руководство пользователя страница 4

English

(04)

04

Safety precautions

Warning

Caution

Unit

 

To reduce the risk of fire, electric shock or 
product damage,

 

- Do not expose this unit to rain, moisture, 

dripping or splashing.

 

- Do not place objects filled with liquids, such 

as vases, on this unit.

 

- Use only the recommended accessories.

 

- Do not remove covers.

 

- Do not repair this unit by yourself.

Refer servicing to qualified service 
personnel.

 

- Do not let metal objects fall inside this unit.

 

- Do not place heavy items on this unit.

AC mains lead

 

To reduce the risk of fire, electric shock or 
product damage,

 

- Ensure that the power supply voltage 

corresponds to the voltage printed on this 
unit.

 

- Insert the mains plug fully into the socket 

outlet.

 

- Do not pull, bend, or place heavy items on 

the lead.

 

- Do not handle the plug with wet hands.

 

- Hold onto the mains plug body when 

disconnecting the plug.

 

- Do not use a damaged mains plug or socket 

outlet.

 

The mains plug is the disconnecting device.
Install this unit so that the mains plug 
can be unplugged from the socket outlet 
immediately.

 

Ensure the earth pin on the mains plug is 
securely connected to prevent electrical 
shock.

 

- An apparatus with CLASS I construction 

shall be connected to a mains socket outlet 
with a protective earth connection.

Unit

 

Do not place sources of naked flames, such 
as lighted candles, on this unit.

 

This unit may receive radio interference 
caused by mobile telephones during use.
If such interference occurs, please increase 
separation between this unit and the mobile 
telephone.

 

This unit is intended for use in moderate 
climates.

 

Do not put any objects on this unit.
This unit becomes hot while it is on.

Placement

 

Place this unit on an even surface.

 

To reduce the risk of fire, electric shock or 
product damage,

 

- Do not install or place this unit in a 

bookcase, built-in cabinet or in another 
confined space.
Ensure this unit is well ventilated.

 

- Do not obstruct this unit’s ventilation 

openings with newspapers, tablecloths, 
curtains, and similar items.

 

- Do not expose this unit to direct sunlight, 

high temperatures, high humidity, and 
excessive vibration.

 

Ensure that the placement location is sturdy 
enough to accommodate the weight of this 
unit (

 23).

 

Do not lift or carry this unit by holding the 
knobs. Doing so may cause this unit to fall, 
resulting in personal injury or malfunction of 
this unit.

 

Keep any IC card or magnetic card such as a 
credit card away from the turntable.

 

- Otherwise the IC card or magnetic card 

may become unusable due to the magnetic 
effect.

Содержание SL-1200MK7

























Отзывы: