Technics SA-GX505, Руководство по обслуживанию

Страница: 43 / 48

Power STANDBY/ON”
(POWER, STANDBY/ON)
This switch is used to turn the power to the main unit ON and
OFF.
Selecting “OFF” from the remote control transmitter actually
the main unit to the “STANDBY” mode.
Remotetontrol signal receptor
(REMOTE SENSOR)
Receives the signals from the
“STANDBY” (STANDBY)
This indicator illuminates when the “STANDBY” mode is se,
by the main unit or the remote control transmitter.
buttons (1-O)
CHANNEL RANDOM PRESET TUNING)
These are used preset broadcast frequencies into
the memory of this unit and recall the desired preset
stations.
control (TUNING)
This control is used select an FM or AM
When turning the control to the
the frequency changes
downward. When turning the control to the right. the
frequency changes upward.
selector/indicator
(TUNING MODE)
Each time this selector is pressed, the selection changes, in
sequence. to “AUTO”, “MANUAL” and “LOCK”.
AUTO:
this position. broadcast channels are automatically
selected when the tuning control is momentarily turned the
left or right start the frequency changing.
MANUAL:
this position, the tuning control can be used to locate the
desired channel manually.
The frequency changes
as the tuning control is turned
the right left.
LOCK:
this position, the broadcast channel presently being heard is
locked in, and other broadcast stations cannot be tuned
even if the tuning control is turned.
Band selectors
FM: Press this button listen an FM broadcast.
AM: this button to an AM broadcast.
FM mode selector (FM MODE)
This unit automatically switches to the stereo when an
FM stereo broadcast is received This is used
the mode (stereo or monaural) of FM broadcast signals.
Memory scan button (MEMORY SCAN)
This button is used to desired broadcast station: each
broadcast station is selected for about 3 seconds.
button (MEMORY)
This button is used when presetting station
frequencies into