Technicolor UCW4026MCS, Руководство интегратора

Страница: 5 / 15

Page 5
1 COM51 Setup for Use with UCW4026MCS
1.1 Verify all COM system software is current.
Visit https://www.technicolor.com/distribute/home-experience/mcs-document-library for the
latest available software, and refer to the COM3000 Integrator’s Manual for instructions to
update these components.
1.2 Configuring the QAM for the UCW4026MCS
The UCW4026MCS utilizes RF channel 23 to receive configuration data, guide data and to
receive software updates when available.
RF channel 23 must always be the first RF channel in the lineup corresponding to QAM index
1, as shown below in Figure 1 - QAM20 output.
Ports 18 and 19, channels 23-2 and 23-3 are disabled when sending a software update. Software
updates should be infrequent and can be scheduled during off-peak hours, but it is our
recommendation to place lower priority channels on these carriers as the video service may be
interrupted for a short time during a software update event.
Figure 1 - QAM20 output