IP COMMANDS
520
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
ip debug sendto
Send UDP packets.
SYNTAX:
ip debug sendto
addr = <ip-address>
[count = <number{1-1000000}>]
[size = <number{0-20000}>]
[interval = <number{1-1000000}>]
[listen = <{disabled|enabled}>]
[dffield = <{disabled|enabled}>]
[srcaddr = <ip-address>]
[srcport = <number{1-65535}>]
dstport = <number{1-65535}>
[dstintf = <{loop|Internet|LocalNetwork}>]
where:
addr
The destination IP address.
REQUIRED
count
The number of datagrams to send.
OPTIONAL
size
The size of the datagram.
OPTIONAL
interval
The interval in milliseconds between datagrams.
OPTIONAL
listen
Don't send, just listen for incoming datagrams.
OPTIONAL
dffield
Enables setting of the don't fragment flag in the IP headers
of the ping packet(s).
OPTIONAL
srcaddr
The IP source address to use.
OPTIONAL
srcport
The UDP source port number to use.
OPTIONAL
dstport
The UDP destination port number to send to.
REQUIRED
dstintf
The IP interface name.
OPTIONAL
Содержание TG582n
Страница 1: ...CLI REFERENCE GUIDE R8 4 Technicolor TG582n ...
Страница 2: ......
Страница 3: ...CLI REFERENCE GUIDE R8 4 Technicolor TG582n ...