Technicolor TCV2480A, Инструкция по эксплуатации

Страница: 44 / 45

Make sure the power cord is connected.
Turn on the unit.
Remove any obstacles between the remote and the unit.
Use the remote near the unit.
Point the remote at the remote sensor on the unit.
Replace the batteries in the remote with new ones.
No power.
The remote does not
function.
Make sure that you’ve selected DVD mode.
The system is in pause mode.Press the
button to return to
normal play mode.
Fast forward or fast reverse is performed.Press the button
to return to normal play mode.
Make sure the AUDIO / VIDEO output and AV IN input
connections are correct.
This unit is too hot. Power off the unit for 30 minutes to cool
down.
The region number of the disc doesn’t match the region number
of this unit.
Clean the disc.
The disc is scratched
plugs and jacks are dirty.Wipe them with a cloth slightly
Clean the disc
There is no disc inside(“No Disc”appears on the screen).
Insert the disc correctly with the label side facing yourself.
Clean the disc.
A non-NTSC disc has been inserted.The unit and disc region
number are incompatible.
Condensation may have formed inside the unit due to a
sudden change in temperature.Wait about an hour for it to
clean and try again.
DVD
No sound or only a
very low-level sound is
heard.
No picture
The picture is not clear
Severe hum or noiseis
heard.
T he disc does not play.
SYMPTOM CAUSE AND REMEDY ( )
TROUBLESHOOTING GUIDE
The
moistened with alcohol.
41