ATA
Thank You for choosing Distributel
In order to ensure the smooth setup of your Distributel High Speed Cable
Internet service, please follow the easy steps laid out in this guide.
Technicolor Modem*
and power supply
The setup kit for your High Speed Cable service with Yak
Digital Home Phone should contain the following items:
Ethernet
Cable (2)
Analog
Telephone
Adapter (ATA)
and power supply
Yak
Digital Home
Phone Setup
Guide
STEP 1
Connect the coaxial cable emerging from your cable outlet to the CABLE port
located on the back of the modem.
Back of Technicolor Modem
Cable Outlet
Coaxial Cable*
* Please note that the modem shown is for the
purposes of illustrating the setup process and
may differ from your device.
* Coaxial Cable should be supplied during
installation. If you require a longer length
of coaxial cable, these can be purchased
at most home electronic stores.
STEP 2
Connect your telephone to the PHONE 1 port located on the back of the Analog
Telephone Adapter (ATA). If you have ordered a second Distributel phone line, it
will be provisioned on the “PHONE 2” port of the ATA.
Before beginning the setup process,
please ensure that all of your equipment
is turned off.
Please wait for the modem to boot-up. The Technicolor modem must have solid
POWER, DS, US and ONLINE green or blue lights displayed. The LINK light should
be either solid or flashing. A flashing LINK light indicates data transferring. If the
lights do not behave as described, repeat steps 1 to 3.
STEP 4A
** Please note that the modem and
router shown is for the purposes
of illustrating the setup process
and may differ from your device.
You may now turn all your devices back on.
STEP 4B
Please wait
2 minutes
for the Analog Telephone Adapter
(ATA) to boot up. The POWER, INTERNET and PHONE 1
lights should become solid green. The PHONE 2 light should
become solid green if you have subscribed to a second
phone line with Distributel. If you do not see the mentioned
lights, please repeat steps 1 to 3.
Front of Technicolor Modem
TECHNICOLOR MODEM LIGHTS
LIGHTS READ
Power
Solid
DS
Solid
US
Solid
Online
Solid
LINK
Solid or Flashing
STEP 3
As the modem only has LAN Port 1 activated, you will need a router to set up the
YAK Digital Home Phone Service. Connect the Ethernet cable provided to the
Internet/WAN port of your router. Then using the other Ethernet cable, connect
LAN Port 1
to the blue INTERNET port of the Analog Telephone Adapter (ATA).
Your Router**
Back of Modem**
Ethernet Cables
Ethernet Port
ATA
Front view of the ATA
LIGHTS
READ
POWER
Solid
Green
INTERNET
Solid
Green
PHONE 1
Solid
Green
PHONE 2
Solid
Green
CONGRATULATIONS!
YOUR SETUP IS
NOW COMPLETE.
ATA
Phone Cable
Home Phone
