Page 17
When you have uploaded the software highlight and copy the file name. Then navigate to the
COM46 401 tab.
Paste the copied file name into the Filename field. Enter the IP address of the COM46 card you
are using for TFTP.
It is recommended to enter the RF channel that the DCI401MCS is currently tuned to in the RF
channel field.
If you leave the Receiver ID with the default 0xffffffff the update will go to all DCI401MCS
boxes connected to the system.
If you prefer to send the update to only one unit then enter the Receiver ID in this field.
Press submit and the message below will appear on screen verifying the TFTP information.
When the command is received the DCI401MCS will display a message on screen that it is
receiving a software update.
