Technicolor COM3000, Руководство интегратора, Страница: 53 / 102

w w w . t e c h n i c o l o r . c o m / m c s Page 53
24.3 Informational Status
The Info section, shown below in Figure 34, provides a view of many key indicators to the
operation of the COM51 card.
➢
A concise index to the characteristics of each individual COM51 card according to its
status and user-defined settings..
Figure 34 - "Info" Section of the Advanced Edit Page
Following is a brief explanation of each field shown above:
Chassis_ID - This field represents which COM400 chassis the card resides in when there are
multiple chassis in the system.
Slot_ID - This field identifies the card’s location within a chassis, numbered 1 through 6.
Tuner - This field identifies the tuner’s location on the COM51 card (1 through 23).
Card_IP - This field shows the IP address of the COM51 card
Receiver ID - This field reports the AT&T / DIRECTV Receiver ID, or RID. This value is
the first of two parameters required to obtain authorization on the AT&T / DIRECTV
network.
CAM_ID - This field reports the AT&T / DIRECTV CAM ID. This value is the second of
the two parameters required to obtain authorization on the AT&T / DIRECTV network.
Network_ID - This field displays the AT&T / DIRECTV network of the currently tuned
channel. This number correlates to a specific satellite and can be used in conjunction with the
Frequency Index” field below to determine whether the card is locked to the correct channel.
Frequency_Index
- This field reports the frequency index corresponding to the channel the
tuner is currently set to. Frequency_Index is a 0-base value. Transponder #s on meters and
IRD are 1 base. To determine the channel’s transponder, add 1 to the Frequency Index.