Technicolor COM3000 Скачать руководство пользователя страница 18

Страница: 18 / 102

w w w . t e c h n i c o l o r . c o m / m c s

Page 18

COM51 Card

The COM51 card, shown in
below, is a customized AT&T / DIRECTV receiver with a built-in smart card and has been
specifically designed to meet the unique requirements of the Lodging and Hospitality markets.

➢

The COM51 base configuration can receive up to 8 HD or SD AT&T / DIRECTV channels. Optional
software upgrades increase the capacity to 23 channels.

➢

The COM51 removes the NDS conditional access encryption and adds Pro: Idiom content
protection DRM.

➢

The output from the card is delivered to a QAM20 modulator or chassis ethernet connections via

the COM400 chassis’

internal 10 gigabit Ethernet network.

➢

Web server user interface

➢

Software upgradable to 23 tuners in one tuner increments

➢

Requires a DSWiM input to both inputs for full 23 channel configuration (one
DSWiM30 per COM51 card.

➢

SWIM input to input one supports 8 tuners

➢

Configurations of more than 8 tuners requires an additional SWiM channel to the
second input.

➢

Hot-swappable

➢

Recessed reset button

➢

LED indicators

See Section 18

➢

Compatible with legacy COM360 chassis and QAM6 modulators

➢

Manual software updates via internal TFTP server.

➢

Queries Technicolor update server for software updates at bootup and at daily
intervals, downloads and installs software automatically.

Server will instruct COM51 to complete update at a prespecified time in early
AM hours.

➢

REST monitoring to AT&T/DIRECTV server is enabled as default.

➢

REST Monitoring and software query can be disabled via software license.

➢

Dual IP allows for local management via the default IP and will allow DHCP address
assignment for COM51.

Figure 4 - COM51 Card

Содержание COM3000







































































































Результаты поиска

Содержание COM3000

Отзывы:

Technicolor COM3000, Руководство интегратора, Страница: 18 / 102

Результаты поиска

Содержание COM3000

Отзывы: