Technicolor CGA4131 Скачать руководство пользователя страница 92

Страница: 92 / 151

3/6/2018

Proprietary and Confidential - Technicolor

This page displays following Site Filter setup information which can be viewed and set by
user:

•

Site Filter Status: (Enabled / Disabled)

•

List of Blocked Sites: (with Content, Type, When, Delete information)

•

Trusted Devices: List of devices auto leant in the gateway.(with Computer Name,

MAC Address, IP Address, Trusted information)

Figure 8.7

8.4.1 User provisioning for Access Control

User provisioning involves enabling or disabling the Access control feature using Site Filter
option.

Blocked Sites

The user needs to create the Blocked Sites by adding the URL details, type, and time of the
day for the filter to be enabled to the list. There is an option to delete the URLs from the
Blocked Sites list.

Trusted Devices

The user can override this feature for specific devices. They need to be added in the Trusted
Devices list with Trusted button enabled.

Содержание CGA4131
























































































































































Результаты поиска

Содержание CGA4131

Отзывы:

Technicolor CGA4131, Руководство по эксплуатации, Страница: 92 / 151

Результаты поиска

Содержание CGA4131

Отзывы: