P:\Housemate\HouseMate DOCS PICS\HouseMate-with-VERA-Edge-Z-Wave-INS.doc
Setting up Vera with HouseMate Home Control (iOS Devices)
Open the Home Control app and long press the spanner icon to enter Technician mode.
Then press Project -> Setup your devices-> Smarthome Controls -> Z-Wave -> Search for gateway -> Vera
to
run the setup wizard
1.
If the setup wizard fails to find your Vera, go to Project -> Setup your devices-> Smarthome Controls
-> Z-Wave -> Static IP Address
2.
Enter the IP address
xxx.xxx.xx.xx
that you noted above. It is beyond the scope of this document to
further explain all the various ways to connect your Vera unit over a domestic router.
3.
Now click on Wifi settings. Turn on your Wifi and make sure that your Vera unit is switched on.
Further setup instructions for HouseMate (iOS)
including how to set up buttons to control your Z-Wave Modules
Follow the instructions in the HouseMate iOS Manual to create pages and buttons.
See
Page 53 Section 6. Z-Wave
to associate your HouseMate buttons with each Z-Wave module.
