Model: RX38Ur
Sub1
SUBOUT
SUBOUT
Sub2
NOTE:
SURROUND ONLY WORKS WHEN ALL
SURROUND SPEAKERS ARE CONNECTED.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
2
3
4
1
6 5
7
8
9
1.Power Supply:
Only use the power cord provided with the unit to power the RX38Ur. When connecting and
disconnecting the power cord, be sure the power of the RX38Ur is off. Connect the cord to the rear of the RX38Ur
and then connect it to the outlet.
The fuse specifications are 3A /250V.If your fuse is blown, replace the fuse with one of the exact same specifications.
When using with a 115V outlet, the unit should be set to 115V
.
2.Power Switch:
Voltage selector. Select between 230V AC 50Hz / 115V AC 65Hz
.
3.Main Speakers:
Connect your speakers to these speaker outputs. The RX38Ur should be powered off and
volume levels turned down when making these connections.
4.Surround Speakers:
Connect your surround speakers to these speaker outputs. The RX38Ur should be
powered off and volume levels turned down when making these connections. The surround speakers only work
when all surround speakers are connected.
5.SUB Output:
Connect the sub output to either a recording device or another amplifier. The signal from the line
output is a passive output and can not be connected directly to a passive speaker.
6.LINE Output:
Connect the line output to either a recording device or another amplifier. The signal from the line
output is a passive output and can not be connected directly to a passive speaker.
7.DVD Input:
Connect any stereo signal such as a DVD, CD, TAPE, Mixer etc to this input. To play a signal
connected to this input make sure the DVD input is selected on the front panel.
8.AUX Input:
Connect any stereo signal such as a DVD, CD, TAPE, Mixer etc to this input. To play a signal
connected to this input make sure the AUX input is selected on the front panel.
9.FM Antenna:
Connect your FM antenna here.
RX38Ur
RX38Ur Rear Panel
