Technical Pro PSHAKE800LED, Руководство пользователя

Страница: 6 / 6

P-5
Connecting a Compatible Device
The PSHAKE800 is Bluetooth compatible.
To connect a Bluetooth device (ie smart phone) to the PSHAKE800 follow the steps listed below.
Be sure that the volume knobs on the PSHAKE800 are turned down at first and then slowly raise the volume to
prevent damage the speakers or any of your other equipment. Press the input selector button to set the input
Bluetooth. Open the Bluetooth connections on your Bluetooth device and search for Bluetooth Devices.
Locate the speaker and pair with it.
Playing Audio from the USB / SD / Inputs
After following the steps above to connect a USB / SD / Bluetooth see the details below for tips on using these
inputs.
Volume Control:
The first volume control are the previous / next track number buttons. Press and hold the previous or next track
buttons to either decrease or increase the volume. This will only affect the volume on the USB, SD & Bluetooth
inputs.
Press and hold down the Previous Track button to reduce the volume of the USB, SD & Bluetooth inputs
Press and hold down the Next Track button to increase the volume of the USB, SD & Bluetooth inputs
The second volume control is the Master Level knob.
Use the Master
Level knob
to increase or decrease the volume of the all Stereo inputs (AUX, USB, SD & Bluetooth)
When playing audio from the USB / SD / Bluetooth inputs press the play/pause, previous and next track buttons to
control the audio. When using the Bluetooth inputs you will also be able to control these features from the Bluetooth
device.
Press the
Previous Track button
to move to the previous track when using the USB, SD & Bluetooth inputs
Press the
Next Track button
to advance to the next track when using the USB, SD & Bluetooth inputs
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements: The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT. FCC Radiation Exposure Statement The equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65. The equipment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).
The Bluetooth word mark and logos are registered trademarks owned by SIG, Inc. and any use of such marks by Technical Pro is under license. Other trademarks and trade name are those of
their respective owners.
PSHAKE800