P-3
1. USB Flash Drive / SD Card Control Module
2. Master Volume Knob: Use this knob to adjust the volume of all Line inputs.
3. Bass Knob: Use this knob to adjust the bass levels.
4. Treble Knob: Use this knob to adjust the treble levels.
5. Microphone Echo: Use this knob to adjust the microphone’s echo.
6. Microphone / Guitar Volume Knob: Use this knob to adjust the microphone volume levels for the
microphone / Guitar connected to the respective inputs (9 & 10).
7. Power Switch: Before the unit is powered on, all of the level controls should be turned down all the way.
Once powered on, slowly begin to raise the levels of the inputs. This will prevent damaging both the
speakers and the amplifier.
8. FM Antenna
9.
¼
” Guitar Input
10.
¼
” Microphone1 Input
11. DC-12V Power Supply: When using the external 12V power supply, the unit will only be able to be
power on and play audio.
12. AUX (RCA) Input: Connect your audio source signals (mixer, Cd player) here using the RCA input.
13. Line Output (RCA): The line output will transmit all the audio connected to the speaker’s inputs to
another audio device such as an amplifier or another powered (active) speaker.
14. Voltage selector: Select between 240V AC 50Hz / 120V AC 60Hz. When using with a 120V outlet, the unit
should be set to 120V.
15. Power Supply: Connect the power cord here. The power button (21) should be set to the off position
before the power supply is connected.
PW2500
PSHAKE1500
