P-4
Power Cord Connection
The
PB1550LED
is a
powered speaker which
means it
has the built in amplifier
that is able to power its speaker.
To
connect the power cord to the
PB1
550
LED
simply plug female side of the power cord into the power cord
input
which is on the rear of the unit. Then plug the male side of
the power cord to an electric outlet.
If
your outlet is not equipped to handle this
type of plug, do not attempt to force
the
AC power cord
into the outlet;
do not alter the plug so that it
can fit in the outlet. The only course of action
you can take is to find another outlet
which is properly equipped to
handle a grounded plug or have an electrician upgrade your electrical outlet. Be sure
that the plug is well
connected so that it does not disconnect in the middle of usage. If at any point in time the
supplied AC power cord
is punctured or damaged replace it with a new power cord from a local electrician.
NOTE:
-ONLY PLUG IN THE AC POWER CORD WHILE THE UNIT’S POWER IS OFF AND THE VOLUME IS
TURNED DOWN.
-TURNING ON THE UNIT WITH THE VOLUME TURNED UP MAY CAUSE THE UNIT OR ANY
SPEAKERS CONNECTED TO IT TO BE DAMAGED.
-ALWAYS TURN DOWN THE VOLUME PRIOR TO TURNING THE UNIT OFF OR ON.
Charging the Rechargeable Battery
Before operating this unit it is important to follow the procedures listed below to protect & prolong the lifespan of the
rechargeable battery.
1. Upon receiving the unit, fully charge the battery before using it. This process can take 8-10 hours. The battery
can be charged with the unit either in the ON or OFF position.
2. After each usage fully charge the battery. When charging the battery the charging LED will be RED. When the battery
is fully charged the indicator will be GREEN.
3. Avoid using the battery until it is completely drained.
4. Do not leave the unit plugged in after the unit has been fully charged.
5. Use the battery at least every two weeks. Not charging the battery periodically may result in the unit not
powering on.
6. Once the battery is depleted and no longer able to recharge, bring it to a recycling center or dispose of it in
accordance with local laws.
Audio Input Connections
1/8” (AUX) Inputs
Connecting
a
Signal Source
The
PB1550LED
has
a
1/8”
input jacks
on the rear of the unit which is designed to receive the signal directly from
your
MP3 player
or any of
your other
audio
sources. To ensure that you have correctly connected your
MP3 player
(or
other sound
sources)
to the unit, make sure that
it
has a
cable
coming from its output and that this cable
is
plugged
into the 1/8”
Input on the rear of the
speaker.
Connecting
USB Flash Drive &
TF
Card
Inputs
There are input jacks for
a
USB flash
drive and TF
card on the rear
panel of
PB1550LED
.
Simply
connect
the USB
flash drive
or
TF
card into their respective input jacks and use the input mode selector
button
to choose
the
corresponding
input. Be sure that the volume knobs on the
PB1550LED
are turned down at first and then slowly
raise
the volume to prevent damage the speakers or any of
your other equipment.
PB1550LED
Содержание PB1550LED
Страница 3: ...P 2 Rear Panel of PB1550LED ...
